English
عربىAn air conditioner production line is a system used to cool a space by removing heat from the space and moving it to certain outside areas. Cool air can then flow throughout the building through ventilation. Air conditioners require a certain work input to operate, otherwise entropy will naturally decrease, which is forbidden by the second law of thermodynamics. An air conditioner acts like a heat pump, but follows a cooling cycle. This cooling cycle can be seen in Figure 2. To cool, a substance called a refrigerant is processed as follows:
Cold liquid refrigerant draws heat from the warmer room in the evaporator, cooling the room.
The refrigerant will then phase into a gas and pass through the compressor to increase its temperature.
The refrigerant then passes through the condenser coil, transferring heat from the refrigerant to the outside air.
The refrigerant expands to reduce its pressure and cools below room temperature to repeat the cycle again.
Air conditioning is a key component of an HVAC system that focuses on home temperature control to maximize the comfort and livability of a space.
Air conditioners are called "split systems" because there is an outdoor unit (condenser) and an indoor unit (evaporator). The two systems work together to accomplish the task of cooling the interior space while dehumidifying it. This dehumidification occurs when warm air from inside passes through a cold evaporator, where it condenses and loses moisture, just as warm air does to a glass of cold lemonade.
A split system describes an air conditioner with separate indoor and outdoor components. There is another type of air conditioner that combines these components into an outdoor system called a "packaged" system.
Washing machine production
Washing machine production
AC solution description：
According to washing machine assembly process flow and plant features, plan the production line layout, propose the appropriate type of conveyance line and realize the streamlined production of the whole production process include the inner barrel and out case assembly and key components manufacturing, such as inner barrel metal forming,out body forming,assembly,performance inspection, packaging and packing, The line can be used for two production modes (SKD and CKD) according to customer budget and part type. The conveyor line can be controlled automatically with PLC with variable speed and stable conveyance.
